Filter
Top Products
26
Block 5 - Reporting Digits Programming (cont.)
Comments
This is the code sent to the central station when the user enters a duress
code. (See Block 3, CL 041 to determine when the duress code is active.)
If the system is divided into areas, the area associated with the duress code
will be identified by the account number (see Block 4, CL 005 - 052).
Disable the reporting by programming 00 into the specified Cmd Loc.
Report Code, Duress
Cmd Loc 093 - 094
Default 0 1
Range 0 - 15
Comments
This is the code sent to the central station when the Fire soft zone is acti-
vated from the keypad. Disable the reporting by programming 00 into
these Cmd Loc.
Report Code, Soft Zone (Fire)
Key: Fire
Cmd Loc 089 - 090
Default 0 1
Range 0 - 15
Comments
This is the code sent to the central station when the user enters a valid user
code following a keypad-activated Police emergency. Disable reporting
by programming 00 into these Cmd Loc.
Report Code, Soft Zone (Police) Restoral
Key: Police
Cmd Loc 087 - 088
Default 0 1
Range 0 - 15
Comments
This is the code sent to the central station when the user enters a valid user
code following a keypad-activated Fire emergency. Disable reporting by
programming 00 into these Cmd Loc.
Report Code, Soft Zone (Fire) Restoral
Key: Fire
Cmd Loc 091 - 092
Default 0 1
Range 0 - 15
Comments
The zone tamper report code is also a single-digit code. For two-digit
reporting formats, the relative zone number (1 - 8) is sent as the second
digit. Program the specific Cmd Loc with 0 to disable reporting. Disabling
a Cmd Loc disables reporting for all zones associated with that location.
Report Code, Tamper (Zones 1 - 32)
Zones: 1 - 8 9 - 16 17 - 24 25 - 32
Cmd Loc 077 078 079 080
Default 1 1 1 1
Range 0 - 15 0 - 15 0 - 15 0 - 15
Comments
This is the code sent to the central station when the user enters a valid user
code following a keypad-activated Medical emergency. Disable reporting
by programming 00 into these Cmd Loc.
Report Code, Soft Zone (Medical) Restoral
Key: Medical
Cmd Loc 083 - 084
Default 0 1
Range 0 - 15
Comments
This is the code sent to the central station when the Medical soft zone is
activated from the keypad. Disable reporting by programming 00 into
these Cmd Loc.
Report Code, Soft Zone (Medical)
Key: Medical
Cmd Loc 081 - 082
Default 0 1
Range 0 - 15
Comments
This is the code sent to the central station when the Police soft zone is
activated from the keypad. Disable reporting by programming 00 into
these Cmd Loc.
Report Code, Soft Zone (Police)
Key: Police
Cmd Loc 085 - 086
Default 0 1
Range 0 - 15
Comments
The restoral report code is a single-digit code. For 2-digit reporting for-
mats, the relative zone number (1 - 8) is sent as the second digit. Disable
the reporting by programming 0 into the specific Cmd Loc. Disabling a
Cmd Loc disables reporting for all zones associated with that location.
Report Code, Restoral (Zones 1 - 32)
Zones: 1 - 8 9 - 16 17 - 24 25 - 32
Cmd Loc 065 066 067 068
Default 1 1 1 1
Range 0 - 15 0 - 15 0 - 15 0 - 15
Comments
The zone bypass report code is a single-digit code. For two-digit reporting
formats, the relative zone number (1 - 8) is sent as the second digit. Disable
this report by programming 0 into the specific Cmd Loc. Disabling a Cmd
Loc disables reporting for all zones associated with that location.
Report Code, Zone Bypass (Zones 1 - 32)
Zones: 1 - 8 9 - 16 17 - 24 25 - 32
Cmd Loc 069 070 071 072
Default 1 1 1 1
Range 0 - 15 0 - 15 0 - 15 0 - 15
Comments
The zone trouble report code is a single-digit code. For two-digit reporting
formats, the relative zone number (1 - 8) is sent as the second digit. Disable
the reporting by programming 0 into the specific Cmd Loc. Disabling a
Cmd Loc disables reporting for all zones associated with that location.
Report Code, Trouble (Zones 1 - 32)
Zones: 1 - 8 9 - 16 17 - 24 25 - 32
Cmd Loc 073 074 075 076
Default 1 1 1 1
Range 0 - 15 0 - 15 0 - 15 0 - 15