Filter
Top Products
NDA-30122 Revision 1
Page 33
Attendant Console Statistics Operations Manual REPORT FORMATS
Attendant, Queue, Route, & Station Report Formats (Cont.)
Finding a Report
Format (Cont.)
Step 3:
Use the Ta b key to select the Find option at the bottom of the screen and
press Enter. The Find a Report Format window will be displayed (Figure
3-6).
Figure 3-6 Find A Report Format Window
Step 4:
At the Find By field, use the UP and DOWN arrow keys to select either
Title or Identifier from the pop-up window and press Enter.
- If Title is selected, the Title field will be displayed. Enter the report title
to be found. The * character may be used as a wildcard at the end of the
string (Example: “Bob*” will find the first report with a title that contains
“Bob” as the first three characters of the report title).
- If Identifier is selected, the Identifier field will be displayed. Enter the
report identifier to be found.
Step 5:
When the Title or Identifier has been entered, use the Tab key to select
the Ok option at the bottom of the screen and press Enter. A search will
now begin for the specified report.
- If a match is found
, the Find a Report Format window is popped
down.The Attendant Reports screen now shows the found report format
highlighted in the left Report Titles window, and the specified report for-
mat details displayed in the right Report Details window.
- If more than one match is found
, each time the Find option is selected
the next match will be highlighted.
- If a match is not found
, the Find a Report Format window remains visible
and an error message is displayed near the bottom of the screen.
Step 6:
To begin another search, repeat Steps 3-5
.
Step 7:
If finished with this specific reports function, use the Ta b key to select
the Exit option at the bottom of the screen and press Enter to return to
the Report Formats menu screen (Figure 3-2).