Filter
Top Products
Mounting an MLC 62 D to a Decora Mounting Bracket
A one-gang, Decora style mounting bracket (“mud rings”) is provided with the MLC 62 D
models. If desired, you can mount the MLC to this type of bracket instead of to an
electrical box. To mount the controller to a Decora style mounting bracket, follow these
steps:
1. Cut a hole in the mounting surface large enough to accommodate the provided
one-gang mounting bracket.
2. Insert the mounting bracket into the hole.
3. Turn the two screws on the bracket so that the locking arms rotate behind the
mounting surface until they clamp securely to it. Do not overtighten.
4. Run the cables through the mounting bracket and attach them.
5. Place the MLC D onto the bracket so that the oval screw holes at the top and bottom
of the MLC line up with the oval holes at the top and bottom of the bracket.
6. Place the wallplate onto the MLC front panel, then attach both to the bracket, using
two of the provided screws in the holes at the top and bottom.
Wall
2.16"
3.88"
Wall Mounting
Bracket
VOLUME
DISPLAY
OFF
ON
MUTE
LAPTOP
VIDEO
PC
Wallplate
MLC 62 RS D
Figure 38. Mounting an MLC 62 D to a Decora Mounting Bracket
MLC 60 Series MediaLink Controllers • Features, Installation, and Operation 32