Filter
Top Products
4–NIC Noninteractive Commands
-updimages_viewver
4-20 SN0054667-00 C
For example:
> qaucli -pr nic -updimages 1 "c:\my dir\valid-image-file"
netscli -updimages c:\temp\temp1
Loading: 1. CNA ...
Loading: 1. CNA Port index : 1 ...
Loading: 1. CNA Port index : 2 ...
=== Updating images for 1. CNA Port Index ===
Loading, please wait ...
Successfully updated Flash (Boot & Firmware images) for 1. Port
Index from file: c:\temp\temp1
=== Updating images for 2. CNA Port Index ===
Loading, please wait ...
Successfully updated Flash (Boot & Firmware images) for 2. Port
Index from file: c:\temp\temp1
-updimages_viewver
To view the Flash version, issue the -updimages_viewver command as
follows:
> qaucli -pr nic -updimages_viewver image_file
-v, -ver
(Display Program Version Information)
To view the version number of QConvergeConsole CLI, issue the -v or -ver
command as follows:
> qaucli -pr nic -v
> qaucli -pr nic -ver
For example:
> qaucli -pr nic -ver
Using config file: G:\Program Files\QLogic
Corporation\QConvergeConsoleCLI\qaucli.cfg
Installation directory: G:\Program Files\QLogic
Corporation\QConvergeConsoleCLI
Working dir: G:\Documents and Settings\user1
Using config file: G:\Program Files\QLogic
Corporation\QConvergeConsoleCLI\netscli.cfg
SANsurfer CNA Networking CLI
ncli version : 1.0.00.59
netSDMAPI : 01.01.05
Copyright 1999-2011 QLogic Corp.