Filter
Top Products
10–Converged Network Adapter Interactive Commands
CNA NIC Configuration
SN0054667-00 C 10-97
Configure New Team
3. CNA NIC Configuration4. Team Configuration3. Configure New Team
From the Configure Teams Menu, select the Configure New Team option to
configure a new team. For example:
Available Team Types:
1=Failsafe Team
2=Switch Independent Load Balancing
3=802.3ad Static Team
4=802.3ad Dynamic Team - Active LACP
5=802.3ad Dynamic Team - Passive LACP
Select Team Type [1]: 1
2. CNA: 1 CNA Port: 1 CNA Model: QLE8242
Mac Phys. Address: 00:0e:1e:04:95:e8 Loc. Mac: 00:0e:1e:04:95:e8
Description: QLogic Dual Port 10 Gigabit Ethernet CNA, PCIe 2.0 Adapter
User assigned name:
CNA Serial Number: AFE1028C03899 Active FW Ver. : 4.07.31 Adapter Alias:
Port 2
Port Alias: None
Link Status: Up
CNA Port: yes
IPv4 Address: 192.168.10.55
IPv6 Addresses: fe80::8177:b777:e679:daf0
Select one or more CNA Port Indices (2 or ALL) : 2
Do you want ot set primary? (yes, no) [yes]:
Member selected as Primary: QLogic Dual Port 10 Gigabit Ethernet CNA, PCIe 2.0
Adapter
Add Non-QLogic Ports as members? (yes, no) [no]:
Updating parameters ... Plese wait ...
User_Assigned_Name []: Team 2
Configure Team Parameters? (yes, no) [no]:
Attempting to create a new team:
Team Description:
Team Type: Fail Over
Selected ports : 2
CNA: 1 CNA Port: 1 MAC: 00:0e:1e:04:95:e8 Description: "QLogic Dual Port 10
Gigabit Ethernet CNA, PCIe 2.0 Adapter"
QLogic D
About to create the team. Please wait ...
Successfully created new team.
Refreshing CNA data ...
Loading: 1. CNA ...
Loading: 1. CNA Port index : 1 ...
Loading: 1. CNA Port index : 2 ...
Refreshing interfaces ... Please wait ...
Reset to 1. CNA (Physical MAC=00:0e:1e:04:95:ec)
Done.