Filter
Top Products
4–NIC Noninteractive Commands
Command Summary
SN0054667-00 C 4-3
Command Summary
This section lists and describes each command line option in alphabetic order,
followed by a command description.
-beacon
(Enable/Disable Port Beacon)
To toggle on and off the port beacon (LED), issue the -beacon command as
follows:
> -switch -beacon [cna_port_inst] <on:off>
For example:
> qaucli -pr nic -beacon 2 on
Loading: 1. CNA . . .
Loading: 1. CNA Port index : 1 ...
Loading: 1. CNA Port index : 2 ...
Successfully set Beacon to: Enabled
-c
To view the adapter port configuration, issue the -c command as follows:
> qaucli -pr nic -c [cna_port_inst]
For example:
> qaucli -pr nic -c 1
=== Displaying CNA Port config info for 1. CNA Port Index ===
Port_Alias : None
Port_Physical_MAC_Alias : john
Port_LLA_MAC_Alias : paul
-cardreset
To activate changes made to Flash, issue the -cardreset command as follows:
> qaucli -pr nic -cardreset [cna_port_inst]
-ch
To view the adapter configuration, issue the -ch command as follows:
> qaucli -pr nic -ch [cna_port_inst]