Filter
Top Products
10–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
SN0054667-00 C 10-65
Display Network Settings
2. CNA iSCSI Configuration3. Port IP Settings<port selection>1. Display Network Settings
Select the Display Network Settings option to view the IPV4 or IPV6 address,
gateway, and subnet mask. For example:
------------------------------------------------------------------
User Defined IP Address.
IPv4 Address : 192.168.1.45
Gateway : 0.0.0.0
Subnet Mask : 255.255.255.0
IPv6 Protocol is currently disabled.
iSNS : Disabled.
------------------------------------------------------------------
Configure IP Settings
2. CNA iSCSI Configuration3. Port IP Settings<port selection>2. Configure IP Settings
Select the Configure IP Settings option to configure the IPV4 or IPV6 address,
gateway, and subnet mask. For example:
Enable IPv4 [on] :
DHCP to obtain IPv4 Network Information: [off] :
IP_Address [192.168.1.45] :
IP_Subnet_Mask [255.255.255.0] :
IP_Gateway [0.0.0.0] :
Enable IPv6 [off] :
Save changes and reset HBA
2. CNA iSCSI Configuration3. Port IP Settings<port selection>3. Save changes and reset HBA
Select the Save changes and reset HBA option to save changes and reset the
adapter.
Refresh
2. CNA iSCSI Configuration3. Port IP Settings<port selection>4. Refresh
Select the Refresh option to refresh the adapter data.