Filter
Top Products
10–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
SN0054667-00 C 10-63
Set Secondary Boot Target Information Select this option to set the secondary
boot target parameters. For example:
Please Enter Selection: 4
Target ID: 2 hba_no: 1 IP: 192.168.30.85 Port: 3260 TGT Instance #: 2
ISCSI Name: iqn.2010-03.com.apps4085:storage.disk0
Alias:
State: Session Active
Target ID: 3 hba_no: 1 IP: 192.168.30.85 Port: 3260 TGT Instance #: 3
ISCSI Name: iqn.2010-03.com.apps4085:storage.disk1
Alias:
State: Session Active
Target ID: 4 hba_no: 1 IP: 192.168.30.85 Port: 3260 TGT Instance #: 4
ISCSI Name: iqn.2010-03.com.apps4085:storage.disk2
Alias:
State: Session Active
Target ID: 6 hba_no: 1 IP: 192.168.30.85 Port: 3260 TGT Instance #: 6
ISCSI Name: iqn.2010-03.com.apps4085:storage.disk4
Alias:
State: Session Active
Enter a Target ID:3
Enter a LUN Number[0,(default 0)]:
Clear Primary Boot Target Information Select this option to clear the primary
boot target information.
Clear Secondary Boot Target Information Select this option to clear the
secondary boot target information.
Set Alternative Client ID Select this option to set the alternative client ID.
Save changes Select this option to save changes.
Save changes and reset HBA Select this option to save changes and reset the
adapter.
Refresh
2. CNA iSCSI Configuration2. Port Configuration<port selection>5. Refresh
Select the Refresh option to refresh the adapter data.