Filter
Top Products
10–Converged Network Adapter Interactive Commands
Read Write Buffer Test
SN0054667-00 C 10-119
Configure Test Parameters
7. Read Write Buffer Test<port selection>1. FCoE3. Configure Test Parameters
From the Read Write Buffer Test menu, select the Configure Test Parameters
option to open a read write buffer test submenu with options to configure the data
patterns, data size, number of tests, test increments, error handling, and loopback
type. For details about these parameters, refer to Table 5-6. For example:
Loopback Test
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
ENode MacAddr : 00:0E:1E:04:95:EB
CNA Model : QLE8242
CNA Desc. : QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (FCoE)
FW Version :
WWPN : 21-00-00-0E-1E-04-95-EB
WWNN : 20-00-00-0E-1E-04-95-EB
Link : Online
=======================================================
1: Data Patterns
2: Data Size
3: Number Of Test(s)
4: Test Increment(s)
5: Abort On Error
6: Enable/Disable Device(s)
Start Diagnostics Test
7. Read Write Buffer Test<port selection>1. FCoE4. Start Diagnostics Test
From the Read Write Buffer Test menu, select the Start Diagnostics Test option
to start the read write buffer test.
iSCSI
4. Adapter Diagnostics1. Converged Network Adapter7. Read Write Buffer Test<port selection>2. iSCSI
This option is currently not supported.