Filter
Top Products
10–Converged Network Adapter Interactive Commands
Display FCoE Port Link Status
SN0054667-00 C 10-137
Display Test Parameters
5. Display FCoE Port Link Status<port selection>1. Display Test Parameters
From the Link Statistics Menu, select the Display Test Parameters option to view
link status logging parameters. For example:
---------------------------------------
Link Status Settings
---------------------------------------
AutoPoll (AP): 10
SetRate (SR): 5
LogToFile (LF): N/A
Reset Test Parameters
5. Display FCoE Port Link Status<port selection>2. Reset Test Parameters
From the Link Statistics Menu, select the Reset Test Parameters option to reset
the link status logging parameters to their default values.
Configure Test Parameters (-ls)
5. Display FCoE Port Link Status<port selection>3. Configure Test Parameters
From the Link Statistics Menu, select the Configure Test Parameters option to
open the Link Statistics submenu with options to specify the polling method, the
polling rate, and the name of the log file. For details about these parameters, see
Table 5-8. For example:
Configure Test Parameters Menu
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
ENode MacAddr : 00:0E:1E:04:95:EB
CNA Model : QLE8242
CNA Desc. : QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (FCoE)
FW Version :
WWPN : 21-00-00-0E-1E-04-95-EB
WWNN : 20-00-00-0E-1E-04-95-EB
Link : Online
=======================================================
1: Auto Poll
2: Set Rate
3: Set Log File