Filter
Top Products
6–iSCSI Noninteractive Commands
-ps
SN0054667-00 C 6-21
-ps
To view persistent targets for the adapter port, issue the -ps command as follows:
-ps <hba_port_inst> [Target ID]
If you do not specify the [Target ID], QConvergeConsole CLI lists all targets
for the specified adapter port number. If you do not specify the port instance
[hba_port_inst]
or the target ID, [Target ID], QConvergeConsole CLI lists
all target IDs for all adapter ports in the system.
-pu
To unbind a persistent target, issue the -pu command as follows:
-pu <hba_port_inst> <Target ID>
-px
To unbind all persistent targets on the adapter, issue the -px command as
follows:
-px <hba_port_inst>
-r
(Update ROM Image)
Be sure to select Save changes and reset HBA afterwards; otherwise, the
changes do not take effect.
Type the following command to update the specified adapter’s ROM:
-r <hba_port_inst> <file_name>
The <hba_port_inst> parameter is the adapter instance to update. The
<file_name> parameter indicates the file containing the ROM image to upload.
CAUTION!
Before attempting to update the ROM image, contact QLogic Customer
Support.
Before updating the ROM image, ensure that no I/O processes are
running.
An administrator must take necessary actions to ensure changes are
fully recognized by the operating system (reboot, flush cache, sync disk,
and so forth).
A ROM update and reset are performed that requires that all applications
accessing impacted LUNs must be shut down.
Any impacted systems must be unmounted.