Filter
Top Products
10–Converged Network Adapter Interactive Commands
CNA FCoE Configuration
SN0054667-00 C 10-41
Present persistently bound target(s) plus any new target(s) with
driver defaults
1. CNA FCoE Configuration5. Driver Parameters<port selection>1. Present persistently bound targets plus any
new targets with driver defaults
From the Drive Settings Menu, select this option to view persistently bound target
devices and new target devices with driver defaults. This setting affects the output
from the Display Configuration option (1. CNA FCoE Configuration42. Target
Persistent Binding41. Display Configuration). You must select the Commit
Changes option to save changes to this option.
Present persistently bound target(s) only
1. CNA FCoE Configuration5. Driver Parameters<port selection>2. Present persistently bound target(s) only
From the Drive Settings Menu, select this option to view persistently bound target
devices only. This setting affects the output from the Display Configuration
option (1. CNA FCoE Configuration42. Target Persistent Binding41. Display
Configuration). You must select the Commit Changes option to save changes to
this option.
Bind by World Wide Port Name
1. CNA FCoE Configuration5. Driver Parameters<port selection>3. Bind by World Wide Port Name
From the Drive Settings Menu, select the Bind by World Wide Port Name option
to configure the CLI to bind ports by WWPN. This setting affects the Bind
Target(s) option (1. CNA FCoE Configuration42. Target Persistent Binding42.
Bind Target(s)). You must select the Commit Changes option to save changes to
this option.
Bind by Port ID
1. CNA FCoE Configuration5. Driver Parameters<port selection>4. Bind by Port ID
From the Drive Settings Menu, select the Bind by Port ID option to configure the
CLI to bind target devices by port ID. This setting affects the Bind Target(s)
option (1. CNA FCoE Configuration42. Target Persistent Binding42. Bind
Target(s)). You must select the Commit Changes option to save changes to this
option.