Filter
Top Products
10–Converged Network Adapter Interactive Commands
CNA NIC Configuration
SN0054667-00 C 10-93
Configure VLAN Parameters
3. CNA NIC Configuration3. VLAN Configuration4. Configure VLAN Parameters
From the Configure VLANs Menu, select the Configure VLAN Parameters
option to configure VLAN parameters. For example:
VLAN(s) Information:
Updating VLANs info ...
Done ...
Available VLAN ID(s):
300, 0
Select VLAN ID : 0
Updating parameters ... Plese wait ...
IFP_Jumbo_Packet_Size (590 .. 9614)[1514]:
IFP_LSO_IPv4_V1 (0-Disabled 1-Enabled )[Enabled]:
IFP_LSO_IPv4_V2 (0-Disabled 1-Enabled )[Enabled]:
IFP_LSO_IPv6_V2 (0-Disabled 1-Enabled )[Enabled]:
IFP_Checksum_Offload_IPv4 (0-Disabled 1-TX Enabled 2-RX Enabled 3-RX and TX
Enabled )[RX and TX Enabled]:
IFP_UDP_Checksum_Offload_IPv4 (0-Disabled 1-TX Enabled 2-RX Enabled 3-RX and
TX Enabled )[RX and TX Enabled]:
IFP_TCP_Checksum_Offload_IPv4 (0-Disabled 1-TX Enabled 2-RX Enabled 3-RX and
TX Enabled )[RX and TX Enabled]:
IFP_TCP_Checksum_Offload_IPv6 (0-Disabled 1-TX Enabled 2-RX Enabled 3-RX and
TX Enabled )[RX and TX Enabled]:
IFP_UDP_Checksum_Offload_IPv6 (0-Disabled 1-TX Enabled 2-RX Enabled 3-RX and
TX Enabled )[RX and TX Enabled]:
IFP_Large_RECV_Offload (0-Disabled 1-Enabled )[Enabled]:
IFP_RSS (0-Disabled 1-Enabled )[Enabled]:
User_Assigned_Name []:
Save configured values? (yes, no) [yes]:
Remove VLAN from Port or Team
3. CNA NIC Configuration3. VLAN Configuration5. Remove VLAN from Port or Team
From the Configure VLANs Menu, select the Remove VLAN from Port or Team
option to remove a VLAN. For example:
VLAN List:
ListIndex: 1 CNA: 1 CNA Port: 2 VLAN ID: 300,0(untag) MAC:
00:0e:1e:04:95:ec Description: QLogic Dual Port
10 Gigabit Ethernet CNA, PCIe 2.0 Adapter #2
Select ListIndex from the list (1 or ALL):