Filter
Top Products
44
©
2014 DJI. All Rights Reserved.
PC / MAC Assistant
For better use of the Phantom 2 Vision+, Phantom 2 Vision+ Assistant and Phantom RC Assistant are required. Both run
on Windows or Mac OS X operating systems.
1 Installing Driver and Phantom 2 Vision+ Assistant
1.1 Installing and Running on Windows
(1) Download the driver installer and Assistant installer (.EXE) from the Phantom 2 Vision+ download page.
(2) Connect the Phantom 2 Vision+ to a PC using a Micro-USB cable.
(3) Run the driver installer and follow the prompts to nish installation.
(4) Run the Assistant installer and follow the prompts to nish installation.
(5) Double click the Phantom 2 Vision+ icon on your desktop to launch Assistant.
Supports Windows XP, Windows 7 and Windows 8 (32 or 64 bit).
1.2 Installing and Running on Mac OS X
(1) Download the Assistant installer (.DMG) format from the Phantom 2 Vision+ download page.
(2) Run the installer and follow the prompts to nish installation.
(3) When launching for the rst time, if using Launchpad to run the Phantom 2 Vision+ Assistant, Launchpad will not
allow access because Assistant has not been reviewed by the Mac App Store.
(4) Locate the Phantom 2 Vision+ icon in Finder, press Control then click the icon (or right-click the icon using a mouse).
Choose Open from the shortcut menu, then click Open in the prompt dialog box to launch.
(5) After the first successful launch, double click the Phantom 2 Vision+ icon as normal to launch using Finder or
Launchpad.
Figure 107
Figure 108
Figure 109
Installing Driver and Phantom 2 Vision+ Assistant