Open as PDF
DJI VISION App Usage
2014 DJI. All Rights Reserved.
Flight Attitude and Radar Function
Flight attitude is indicated by the ight attitude icon.
(1) The red arrow shows which direction the Phantom 2 Vision+ is facing.
(2) Light blue and dark blue areas indicate pitch.
(3) Pitching of the boundary between light blue and dark blue area shows roll angle.
Tap ight attitude icon to turn on the radar function. Home in the center of the radar and the red icon indicates the
Phantom 2 Vision+’s current heading, direction, and approximate distance from home. Tap ight attitude icon again
to disable the radar.
By default, the center of the radar indicates the home point recorded by the Phantom 2 Vision+. Tap the
center of the radar to switch the center to your mobile device's current location.
If your mobile device contains a compass, the top portion of the Radar is the direction you are pointing. If
not, the radar will be oriented due north.
Distance units are metric in Figure 68 and Figure 69. Users can switch the unit to imperial in the settings
Distance: Horizontal distance from home point.
Altitude: Vertical distance from home point.
Speed: Horizontal ying speed.
Distance value will show as N/A if the Phantom 2 Vision+ is not in “Ready to Fly” mode.
Wi-Fi Signal Intensity
Indicates camera is connected to your mobile device and Wi-Fi is working normally.
The connection between the camera and mobile device may fail if Wi-Fi signal strength is low. Refer to Phantom 2
Vision+ CONNECTION BROKEN for more information.
Flight Battery Level
Show current ight battery level. When battery level is low and the battery icon turns red it is recommended to y the
aircraft back and land it as soon as possible. Please refer to Low Battery Level Warning Function (Page 28) to get
Aircraft GPS Status
GPS status icon display the number of satellites found by the aircraft. The icon is highlighted when more than 6
satellites are found, allow the Phantom to y in “Ready to Fly” mode.
Micro-SD Card Status
Displays Micro-SD Card Status. Icon is highlighted when a valid Micro-SD card is inserted. If there is no Micro-SD
card present, it is grayed out.
Range Extender Battery Level
Shows current battery level of the Range Extender. Refer to Checking the Battery Level (Page 21) for more details.
Displays estimated shots remaining, based on the current photo size setting and storage capacity of the Micro-SD
card. This shows ‘0’ if:
(1) Micro-SD card is not inserted.
(2) Micro-SD card is full.
Mobile Device Position