Filter
Top Products
DJI VISION App Usage
40
©
2014 DJI. All Rights Reserved.
[
5
]
Parameter Unit
Select imperial or metric units of measurement.
[
6
]
Ground Station
Slide to the right to enable ground station feature.
[
7
]
FPV Mode
Switched on, the gimbal will work in FPV mode. Switched off, the gimbal will work in Stabilize mode.
[
8
]
Auto Flips
The user interface of the DJI VISION App will ip if the mobile device’s auto-ip is enabled.
[
9
]
Battery Low Warning
If enabled, an alarm will sound when the battery level is too low.
We recommended adjusting the mobile device volume to the highest level.
[
10
]
Tutorial
Hints and Tips
[
11
]
Clear News Cache
Tap to ush news cache.
[
12
]
Binding
In the event that camera and Range Extender binding is lost or an item has been repaired or replaced, binding must be
performed using the DJI VISION App. Refer to Binding the Phantom 2 Vision+ and Range Extender (Page 21) for details.
[
13
]
Rename SSID of Range Extender
Tap to rename the SSID of the Range Extender. Refer to Rename Range Extender SSID (Page 21) for details.
[
14
]
Find My PHANTOM 2 VISION
[
15
]
Account
Tap to see user account information.
[
16
]
Rate
Tap to rate the DJI VISION App. Internet access required.
Android App does not include rating.
[
17
]
About
Tap to see the current version of the DJI VISION App and contact information.
My location
Phantom 2 Vision's
location
Figure 96 Figure 97
My location
Phantom 2 Vision's
location