Filter
Top Products
1-15
Getting Started
Steps for Setting Up Eye-Diagram Analysis
Laser and Optical-
to-Electrical
Converter
If you have access to a laser and an optical-to-electrical converter, use the
connections shown in the following figure. To protect the input connectors,
use adapters between the cables and the connectors. The laser is the device
being tested.
Cables:
SMA to SMA (Channel 1) p/n 8120-4948
SMA to SMA (Channel 2) p/n 8120-4948
SMB to SMB (10 MHz Reference) p/n 8120-5025
Miscellaneous:
3.5 mm (f) to 2.4 mm (f) (two) p/n 1250-2277
6 dB attenuator 8493C