Filter
Top Products
4-11
Programming Commands
Introduction
Example OUTPUT Mta;"PROG:STR ’Command’,’MEAS’"
OUTPUT Mta;"PROG:WAIT?"
ENTER Mta;A$
OUTPUT Mta;"PROG:STR? ’Response’"
ENTER Mta;Response$
OUTPUT Mta;"PROG:STAT CONT"
PERSIST
The PERSIST command string controls persistence displays. Persistence
modes are available through the standard microwave transition analyzer
remote commands, however, special color maps are necessary for proper dis-
play and are available only with Instrument BASIC.
Command parameters include INF, VAR, COLGRAD, MONOGRAD, and OFF.
Each parameter has the following action:
• INF turns on infinite persistence mode.
• VAR turns on variable persistence mode.
• COLGRAD turns color graded persistence mode.
• MONOGRAD turns monochrome graded persistence mode.
• OFF turns persistence mode off.
Values of Program Variables
Variable Data Type Value
Command
string MEAS
Param
There are no parameters for this command.
Response
string example: 25.1 14.2 9.67
2.23 8.91 4.5 2.11 6.7