Filter
Top Products
Eye-Diagram Analyzer Reference
Saving to Mass Storage
4 Enter the disk drive’s unit number by pressing:
UNIT NUMBER
This number is typically a 0 or 1. Zero usually indicates the disk drive’s left
side slot.
5 Enter the disk drive’s volume number by pressing:
VOLUME NUMBER
The volume number should be left at the default value of zero for floppy disk
drives.
6 Continue by pressing:
MENU, page 1 of 2, States, more 1 of 2, mass storage, msi:,
HP-MSIB CARD
Although CARD is selected, the display’s GPIB disk softkey, pressed in Step 3 ,
redirected communications to the GPIB disk drive.