Filter
Top Products
3-43
Eye-Diagram Analyzer Reference
Saving to Mass Storage
Entering a File Name without a Keyboard
a Turn the front-panel knob to move the character-select cursor.
b Press SELECT CHAR to enter a character at the character-select cursor.
c Press the numeric keypad to enter numbers or a minus sign.
d The INSERT or ... softkey determines the action of the SELECT CHAR soft-
key. Choices are INSERT a character, REPLACE an existing character, or
DELETE a character.
e Press the ⇑ and ⇓ keys (beneath the front-panel knob) to move the com-
mand-entry cursor.
f Use the CLEAR TO END softkey to remove characters from the command-
entry cursor to the end of the command.
To Recall a File Use this procedure to recall a file from the default memory. To select default
memory, refer to “Selecting and Formatting Memory” on page 3-34.
1 To recall a file, press:
MENU, page 1 of 2, States, more 1 of 2, mass storage
Rotate the front-panel knob to select (highlight) the desired file.
2 Load the file by pressing:
LOAD FILE
To Erase a File Use this procedure to erase a file in the default memory. To select default
memory, refer to “Selecting and Formatting Memory” on page 3-34.
1 To erase a file, press:
MENU, page 1 of 2, States, more 1 of 2, mass storage
Rotate the front-panel knob to select (highlight) the desired file.
2 To erase the file, press:
more, PURGE FILE, ENTER LINE