Filter
Top Products
3-45
Eye-Diagram Analyzer Reference
Saving to Mass Storage
To Erase a Custom
Prefix
1 To erase a custom prefix, press:
MENU, page 1 of 2, States, more 1 of 2, mass storage, more, CHANGE
PREFIX
Repeatedly press the ⇓ step key until the cursor is located at the start of the
custom text.
2 Clear the text by pressing:
CLEAR TO END, ENTER LINE
To Save an
Instrument State
1 Set the eye-diagram analyzer to the desired settings.
2 Insert a ROM card into the front-panel card slot.
3 Save the instrument state by pressing:
Mass Storage, SAVE STATE
To Load a State or
Mask/Limit Line
1 Insert a ROM card into the front-panel card slot and then press:
Mass Storage
Rotate the front-panel knob to highlight the desired file.
The prefix "S_" identifies instrument state files.
The prefix "M_" identifies mask/limit line files.
2 Load the file by pressing:
LOAD FILE