Filter
Top Products
Eye-Diagram Analyzer Reference
Saving to Mass Storage
Working with Files
Files are identified by a prefix and a name. The eye-diagram analyzer assigns a
prefix according to the type of data, as shown in the following table. You enter
the file name. When cataloged, the file listings show the file’s data type and
size in bytes.
You can create additional prefix text for your file names. The text, appended
to the standard prefixes, allows you to indicate files that have similar data. For
example, the following figure shows a catalog of two mask files. Each file has
an additional prefix of Shape. The additional prefix is appended, regardless of
the type of file you are saving.
The total length of your file name cannot exceed 10 characters for LIF and 8
characters for DOS. This includes prefix and file name.
File Prefixes
File Type File Prefix
Calibration data c_
Histograms h_
Instrument registers r_
Instrument state s_
Mask/Limit line m_
Program d_
Trace t_
User corrections a_
User menu k_
Jitter template T-