Filter
Top Products
3-6 (E)
HDCU-950 IMM
* System Diag 2/3 *
CAMERA Cable Connect
Data OK
Power ON
RCP/CNU Cable Connect
Data OK
Power OFF
PANEL Cable Open
Data --
Power ON
1
2
3
4
5
6
7
8
9
* System Diag 3/3 *
Intercom
CAMERA CH1 PROD
MIC ON
CH2 PROD
MIC ON
CAMERA MIC Gain
CH1 60dB Local
CH2 60dB Local
1
2
3
3-3. Character Display Function
Page 6
System Diag (2/3) Display
No. Contents
1 State of camera cable connection (Open/Connect)
2 Existence of data from the camera (__/Wait/Sense/OK)
__ : The communication with the camera cannot be
established.
Wait : The communication with camera is in the wait
state.
Sense : The communication with the camera is being
established.
3 State of the power supply of the camera (ON/OFF)
4 State of cable connection of the RCP/CNU connector on
the rear panel of the unit (Open/Connect)
5 Existence of the data from the RCP/CNU connector on
the rear panel of the unit (__/Wait/Sense/OK)
__ : The communication with the equipment
connected to the RCP/CNU connector cannot be
established.
Wait : The communication with the equipment
connected to the RCP/CNU connector is in the
wait state.
Sense : The communication with the equipment
connected to the RCP/CNU connector is being
established.
6 Power is supplied or not to the RCP/CNU connector on
the rear panel.
ON : 30 V power is supplied for RCP.
OFF : Power is turned off.
7 State of cable connection with the front panel (Open/
Connect)
8 Existence of the data from the front panel (__/Wait/
Sense/OK)
__ : The communication with the equipment
connected to the PANEL connector cannot be
established.
Wait : The communication with the equipment
connected to the PANEL connector is in the wait
state.
Sense : The communication with the equipment
connected to the PANEL connector is being
established.
9 Power is supplied or not to the front RM panel.
ON : 30 V power is supplied for the front panel.
OFF : Power is turned off.
Page 7
System Diag (3/3) Display
No. Contents
1 Setting state of the intercom channel 1 of the camera
side (ENG/PROD)
2 Setting state of the intercom channel 2 of the camera
side (ENG/PROD)
3 Gain and control state of the microphone circuit of the
camera side (Remote/Local)