System Management Release Notes
4.26 SCACP Error Counter Reports Retransmit Errors
exist on the LAN devices that the PEdriver uses. If there are retransmits and no
devices errors, then the PEA0: device errors are likely retransmits and not actual
errors.
4.27 Virtual Connect
The following section pertain to Virtual Connect.
4.27.1 Failover and RECNXINTERVAL
V8.3-1H1
RECNXINTERVAL may have to be increased above the default of 20 to allow time
for Virtual Connect Manager failovers. This is especially true in larger clusters.
4.28 INITIALIZE/ERASE=INIT Before Using Media
V8.3-1H1
HP recommends that you issue the DCL command INITIALIZE/ERASE=INIT on
storage media prior to using them for the first time. This eliminates any stale
data that was left from previous use by another operating system or diagnostics.
An indication of such stale data is three questions marks (???) in the console
command output, as shown in the following example:
Shell> ls fs1:\
Directory of: fs1:\
00/00/07 19:16p 1,788,984,016 ???
00/00/80 12:00a 0 ???
2 File(s) 1,788,984,016 bytes
0 Dir(s)
The problem will be corrected in a future release.
4.29 Performance Data Collector for OpenVMS (TDC)
V8.3-1H1
TDC_RT Version 2.2-107 is included in the OpenVMS Version 8.3–1H1
installation. An update to TDC Version 2.2-108 is now available from the
TDC Web site at:
http://www.hp.com/products/openvms/tdc/
TDC Version 2.2-108 corrects several issues discovered in TDC_RT Version
2.2-107. It also enables collection of internet metrics in TCPware and MultiNet
environments, adds additional metrics to several data records, and provides new
programming features and sample code in the TDC Software Developers Kit.
4.30 Recovering From System Hangs or Crashes (Integrity servers
Only)
V8.2
If your system hangs and you want to force a crash, press Ctrl/P from the console.
The method of forcing a crash dump varies depending on whether XDELTA is
loaded.
System Management Release Notes 4–23
