OpenVMS Associated Products Release Notes
2.13 DECforms Web Connector Version 3.0 (Alpha Only)
2.13 DECforms Web Connector Version 3.0 (Alpha Only)
V7.3-1
If you already have DECforms installed, perform the following tasks to enable
DECforms Web Connector V3.0 to run on OpenVMS Version 7.3-1 and higher:
1. Remove or comment out the following line:
$ @SYS$COMMON:[JAVA$122.COM]JAVA$122_SETUP.COM
from these command procedures in the FORMS$INSTALL_AREA directory:
• FORMS_SMGR_STARTUP.COM
• FORMS_WEB$STARTUP.COM
• FORMS_WEB_CONFIG.COM
2. Ensure that the Java environment is set up systemwide for all processes.
HP recommends adding the Java environment setup to the system’s
SYSLOGIN.COM file.
3. Ensure that the browser clients use the Sun Java Plugin Version 1.2.2, as
stated in the SPD and the Administrative guide.
2.14 DEC PL/I: RTL Support for OpenVMS
V7.3
There is a known incompatibility between the PL/I RTL distributed with
the OpenVMS operating system and the more recent PL/I RTL owned and
distributed by Kednos Corporation. The older version shipped with the
OpenVMS operating system may overwrite a newer version. The image effected
is SYS$LIBRARY:DPLI$RTLSHR.EXE.
OpenVMS distributes the following version of the file, which can be identified by
using the DCL command ANALYZE/IMAGE:
Image Identification Information
image name: "DPLI$RTLSHR"
image file identification: "V4.0-6"
If you execute an ANALYZE/IMAGE command before upgrading to OpenVMS
Version 7.3 or higher and find a newer version of DPLI$RTLSHR.EXE, you can
either copy it and restore it after the upgrade or reinstall the PL/I kit.
Any questions about DEC PL/I and VAX PL/I should be directed to Kednos
Corporation:
Phone: (831) 373-7003
Email: tom@kednos.com
See a related note in Section 5.34.
2.15 FMS Kits
V8.3
You can install either of the following FMS kits (or later versions) on both
OpenVMS Alpha and OpenVMS Integrity servers:
Full kit: HPFMS025
OpenVMS Associated Products Release Notes 2–5
