A SERVICE OF

logo

Open as PDF
next previous
Locating the Serial Number
AdeptSix 300CR Robot Instruction Handbook, Rev. A 15
1.4 Locating the Serial Number
The ID serial number of the AdeptSix 300CR robot corresponds to the ID number of the
controller. You can check the controller ID using the V+ ID command. The robot’s ID serial
number is located on a label on the robot base. See Figure 1-1.
Figure 1-1. Robot ID Serial Number
WARNING: Confirm that the robot and the controller have
the same serial number. Special care must be taken when
more than one robot is to be installed. If the numbers do
not match, robots may not perform as expected and cause
injury or damage.
Location
of serial
label