Filter
Top Products
Operation
5–12 975-0083-01-01
Types of fault
messages
There are two types of System Control Panel fault messages: automatic
and manual. For a list of faults and their associated types, refer to Chapter
6, “Troubleshooting”.
Automatic faults clear themselves automatically if the fault condition
goes away.
Manual faults require you to clear them by:
• selecting Clear Faults on the menu of the device that generated the
fault (if the fault condition still exists, the fault message will
reappear).
• correcting the condition that caused the fault.
Viewing the System Control Panel fault log
The fault log lists the most recent System Control Panel faults, up to a
total of 20. On each line, the log shows the fault code, the date the fault
occurred, and the time the fault occurred.
To view the fault log:
1. On the System Panel advanced menu, press the down arrow button to
highlight Fault log.
2. Press Enter.
Figure 5-8
System Control Panel fault message
continue cancel
Figure 5-9
System Control Panel fault log
scp_manual.book Page 12 Wednesday, March 10, 2010 5:03 PM