Filter
Top Products
Operation
5–10 975-0083-01-01
To view a message from the warning list:
1. On the warning list, use the up arrow or down arrow button to
highlight the warning message you want to view.
2. Press Enter.
The complete warning message appears.
After viewing the warning message, you can return to the warning list by
pressing Exit or continue to the menu for the device that caused the
warning by pressing Enter. Each time you return to the warning list after
viewing a complete message, the viewed message is removed from the
list.
If you have left the warning list, you can view it at any time from the
System Settings menu.
To view the warning list:
1. On the Select Device menu, highlight System and press Enter.
2. On the System Settings menu, highlight View Warning List and press
Enter.
Viewing the System Control Panel warning log
The System Control Panel warning log displays the 20 most recent
warnings that the System Control Panel generated. These warnings can be
both active and cleared. Each warning in the log is identified by a warning
code and the time that it occurred. You may need to refer to the warning
log before consulting Chapter 6, “Troubleshooting”, or before you call
technical support.
To view the warning log:
1. On the System Panel menu, press the down arrow button to highlight
View Warning Log.
2. Press Enter.
To return to the System Panel menu:
◆ From the Warning log, press Exit.
scp_manual.book Page 10 Wednesday, March 10, 2010 5:03 PM