Filter
Top Products
Configuration
4–2 975-0083-01-01
Configuring the System Control Panel
You can configure the System Control Panel to suit your preferences and
the requirements of the Xanbus system. Some of the configurable
settings, such as the system time, affect the entire system. Other settings
affect only the System Control Panel itself, such as the brightness of the
display.
You can perform all these tasks on the System Panel menu, the Clock
menu, and the System Settings menu.
The System Panel Menu
Configuring the System Control Panel is done on the System Panel menu,
which you can view in either basic or advanced formats. See “Viewing
Advanced Menus” on page 5–5 for more information.
Basic menu The basic menu contains settings you may have to adjust routinely. The
System Control Panel shows the basic menu by default.
Advanced menu The advanced menu contains all items on the basic menu, as well as
additional configurable settings.
The advanced menu also contains a command to return it to the basic
format.
Figure 4-1 shows which items are on the basic and advanced System
Panel menus.
Figure 4-1
System Panel menu contents
ADVANCED MENUBASIC MENU
Brightness
Contrast
Light Timer
Button Beep
Fault Alarm
LoBatt Alarm
Set Degrees
Clear Faults
View Fault Log
View Warning Log
View Event Log
Restore Defaults
Basic Menu
Brightness
Contrast
Button Beep
Clear Faults
System Panel
System Panel
scp_manual.book Page 2 Wednesday, March 10, 2010 5:03 PM