Filter
Top Products
Configuration
4–8 975-0083-01-01
If you make an error, press Exit to move back to the value you need to
reset. If you decide to abandon resetting the time, press Exit
repeatedly until you return to the Clock menu.
Setting the date
You can set the reference date for the Xanbus system from the Clock
menu.
To set the date:
1. On the Clock menu, use the up arrow or down arrow button to
highlight Set Date.
2. Press Enter to highlight the month.
3. Use the up arrow or down arrow button to change the month.
4. When the correct month is shown, press Enter to select it and
highlight the day.
5. Use the up arrow or down arrow button to change the day.
6. When the correct day is shown, press Enter to select it and highlight
the year.
7. Use the up arrow or down arrow button to change the year.
8. When the correct year is shown, press Enter to select it and return to
the Clock menu.
If you make an error, press Exit to move back to the value you need to
reset. If you decide to abandon resetting the date, press Exit
repeatedly until you return to the Clock menu.
scp_manual.book Page 8 Wednesday, March 10, 2010 5:03 PM