Filter
Top Products
Installation
2–2 975-0083-01-01
Installing the System Control Panel
The System Control Panel is designed to be flush mounted through an
opening in a wall and secured with four #6 screws. Use the supplied
mounting template to precisely mark the opening and screw hole
locations.
Planning an
installation
The System Control Panel requires no connections other than the network
cables that plug into the back of the unit. Because you cannot access the
network inputs once the unit is mounted, the network cables need to be
routed through the wall before securing the System Control Panel.
Refer to the Xanbus System Installation Guide for more information about
planning and installing a network that includes the System Control Panel.
Materials and
tools required
You will need these materials and tools to complete the installation:
❐ mounting template sticker (supplied)
❐ four #6 screws (supplied)
❐ Phillips head screwdriver
❐ jigsaw or small keyhole saw
❐ power drill with 1/8" bit (optional)
❐ Xantrex network cables or equivalent
Choosing a
location
Choose a location that is easily accessible. The System Control Panel
should be mounted where it is easily visible, with unobstructed access to
the screen and push buttons.
The location should be indoors, dry, and free from corrosive or explosive
fumes.
CAUTION
Allow at least 2 ¼ inches (57 mm) of space behind the wall to accommodate the
depth of the unit and allow room for the network cables to bend.
scp_manual.book Page 2 Wednesday, March 10, 2010 5:03 PM