Filter
Top Products
Clock Menu Configuration Items
975-0083-01-01 4–7
Clock Menu Configuration Items
Setting the time
Because the System Control Panel keeps time for the power system,
setting the clock to the correct local time is essential for the system to
operate as expected. The clock also provides the time stamps for the
Warning, Fault, and Event logs.
When you first power up the System Control Panel, it will not begin
operating normally until you set the time.
To set the clock:
1. On the Clock menu, with Set Time highlighted, press Enter.
2. Press Enter to highlight the hour.
3. Use the up arrow or down arrow button to change the hour.
4. When the correct hour is shown, press Enter to select it and highlight
the minute.
5. Use the up arrow or down arrow button to change the minute.
6. When the correct minute is shown, press Enter to select it and
highlight the AM/PM value.
If you are using a 24-hour clock, you will return to Set Time at this
point. Proceed to step 9.
7. Use the up arrow or down arrow button to choose AM or PM.
8. When the correct value is shown, press Enter to select it and return to
the Clock menu.
9. Press Enter to return to the Select Device menu.
Menu
item Description Values Default
Set Time Sets reference time for the
power system.
12:00 AM–11:59 PM,
00:00–23:59
n/a
Set Date Sets the reference date for
the power system.
month day year
(Jul 1, 04, for example)
n/a
12/24
Hour
Configures the System
Control Panel to use a 12-
hour clock or 24-hour
clock.
12hr, 24hr 12hr
scp_manual.book Page 7 Wednesday, March 10, 2010 5:03 PM