Filter
Top Products
127
SUBMITTAL SHEETS
Unitary Valve
VU54
VU54
Three-way Fan Coil Valve, the VU54
high pressure zone valves are used
to control the flow of hot or chilled
water in commercial HVAC
equipment such as fan coil units,
terminal reheat coils and
convectors.
IMPORTANT: These valves are not
for use in systems containing
dissolved oxygen.
SPECIFICATIONS
Valve Type ............................................Fan Coil Valve
Valve Size ............................................1/2; 3/4; or 1 in.
Connection Type ..................................Sweat; NPT; or
1/2 in. Inverted flare
Body Pattern ........................................Three-way A-AB-B
Flow Characteristic ...............................Quick Opening
Controlled Medium ...............................Hot Water; Chilled Water with
up to 60% Glycol
Maximum Safe Operating Pressure ..... 300 psig (2068 kPa)
Ambient Temperature Range ...............34 F to 125 F at 200 F Fluid
(1 to 52 C @ 94 C Fluid )
Actuation ..............................................Must be purchased separately
Materials
(Body) ...................................................Brass
(Stem) ...................................................Brass
(Seat) ....................................................Brass
(Plug/Ball/Disc) .....................................Buna-N rubber
(Packing) ..............................................EPDM rubber
APPROVALS
Canadian Standards Association .........CSA C/US
FEATURES
• Compact construction for easy installation.
• Fits under the cover of most baseboard convectors with
actuator fitted to valve body.
• VU54 provides three-way diverting control of water.
• 300 psi (2,000 kPa, PN20) operating pressure rating.
• Patented ball seal provides long service life, soft close off.
• Triple O-ring seal provides three lines of defense against
corrosion and water leakage around drive shaft.
• Quick opening flow curve.
• Choice of NPT end connections for iron or steel piping.
DIMENSIONS DIAGRAM
2
2
1
1
VU54 VALVE WITH VU448 ACTUATOR
VU54 VALVE WITH ACTUATOR
VU ACTUATOR
2-3/8
(60)
7/8 DIA.
(22)
1-1/2
(38)
3-3/4
(133)
15/32
(12)
3/8
(10)
1-3/4
(44)
1-3/4
(44)
A
A
B
AB
7
3/8
(10)
A
2-1/8 (54)
(INVERTED
FLARE)
1-3/4
(44)
1-3/4
(44)
B
VALVE BODY SIZE A B
1/2 IN. SWEAT 1-5/6 (33) 1-5/6 (33)
3/4 IN. SWEAT 1-3/8 (35) 1-11/16 (43)
1 IN. SWEAT 1-11/16 (43) 1-11/16 (43)
1/2 IN. NPT 1-3/8 (35) 1-5/16 (33)
3/4 IN. NPT 1-11/16 (43) 1-7/16 (37)
HEIGHT NEEDED TO REMOVE ACTUATOR OR COVER
OPENING FOR 1/2 IN. CONDUIT ON OPPOSITE SITE OF
MANUAL LEVER FOR ALL MODELS.
M16819