Filter
Top Products
116
VC Series Two-position Actuators
Control central heating and/or
cooling systems, fan coil systems,
radiators and convectors.
Depending on the model selected,
it can be controlled by either a low
or line voltage SPST controller such
as a room thermostat.
SPECIFICATIONS
Actuator Type .......................................Valve
Control Signal ....................................... 24 Vac, 100-130 Vac,
or 200-240 Vac
Fail Safe Mode .....................................Stays in place
Electrical Protection .............................Double Insulated
Ingress Protection Rating .....................IP40
Electrical Connections .........................Plenum-rated cable (24 V);
cable (line voltage)
Frequency ............................................ 60 Hz
Manual operation .................................Lever
Mounting ..............................................Direct Coupled
Shaft Adapter Type ..............................Self-alignment
Stroke ................................................... 0.4 in. (10 mm)
Supply Voltage ..................................... 24 Vac; 100-130 Vac;
or 200-240 Vac 3-wire.
Timing, Nominal Driving at 60 Hz ........6 sec.
Power Consumption, Driving ............... 6 VA
Materials ............................................... Plastic housing
Operating Humidity Range (% RH) ......5 to 95% RH, non-condensing
Medium Temperature ...........................203 F (95 C)
Ambient Temperature Range ............... 32 F to 150 F (0 C to 65 C)
Temperature Ratings (Shipping) .......... -40 F to 150 F (-40 C to 65 C)
Storage Temperature Range ................ -40 F to 150 F (-40 C to 65 C)
Weight ..................................................0.57 lb (0.26 kg)
Includes ...............................................3/8 in. flex conduit adapter
(24 V models)
APPROVALS
Canadian Standards Association ........CSA Certified: LR1322-367
CE ........................................................89/336/ECC, 73/23/EEC
Underwriters Laboratories, Inc. ........... UL Recognized, File#
MH11826
FEATURES
• Use with two-way or three-way valves.
• Minimal actuator power consumption.
• Double insulated actuator.
• Quick-connect or one meter cable electrical connections
available.
• Quick and easy replacement of moving parts.
• Actuator head installation does not require draining the
system.
• On/Off models with six second nominal timing
• Use two-position actuators with 1000 Series 2-way and
6000 Series 3-way VC valve bodies only.
• All VC Series actuator-valve combinations provide 60 psi
close-off.
Unitary Valve Actuator
VC Series Two-position Actuators