Philips SM30 Video Game Sound System User Manual


 
10
14.7.14 CLEARING MEMORY
14.1 Main menu selection
Select from the main menu by means of the
left/right arrow keys: CLEAR MEMORY
14.2 Confirmation
Since this is a potentially hazardous program
(it will erase all programming) after pressing
ENTER the display will show: ARE YOU
SURE ?
PRESS < TO CLEAR
Only the left arrow key will proceed with
clearing; any other key will return to the
main menu without clearing the memory.
14.3 Wait display
After pressing the ENTER key, the display
will show that clearing memory is in
advance.
14.4 Power-on delay
14.5 System down
When the memory is cleared the display will
show that the SM30 system is down. The
installer programming password must be re-
entered, and the setup program run, in
order to continue.
14.7.15 ALARM MODE
Alarm signals activated by a control input
can be interrupted by a Call Station with
higher priority. When the overruling call
ends, the alarm signal will return and
continue till the end of the signal.
15.1 Main menu selection
Select from the main menu by means of the
left/right arrow keys: CTL ALARM MODE
Clear Memory
SELECT PROGRAM :
CLEAR MEMORY
ARE YOU SURE ?
PRESS < TO CLEAR
CLEARING MEMORY
PLEASE WAIT
POWER - ON - DELAY
MEMORY CLEARED
SYSTEM IS DOWN
2
3
1
14
4
5
Control Alarm Mode
SELECT PROGRAM :
CTL ALARM MODE
CTL ALARM MODE
CTL ALARM MODE
INTERRUPTABLE
NON - INTERRUPT
2
3
1
GB/SM 30 user manual 5/26/98 10:18 AM Page 10