Filter
Top Products
47
14.3.4 MUSIC ROUTING
4.1 Main menu selection
Select from the main menu by means of the
left/right arrow keys:
MUSIC ROUTING.
4.2 Zone selection
The current music routing will be displayed.
Zones which are already selected are
indicated on the display by 1, not selected
zones are indicated by a 0.
The lower right of the display shows the
number of the zone indicated by the cursor
position. Moving the cursor to another zone
can be done with the left/right arrow keys.
Shifting the cursor to the right, further than
the last position, will display the routing of
zones 7-12, if Zone Relay Module 2 is
present. Shifting the cursor to the right
again, further than the last position, will
display the routing of zones 13-18, if Zone
Relay Module 3 is present. If only Zone
Relay Modules 1 and 3 are present, the
routing of zones 13-18 will be displayed
instead of 7-12. Selecting a zone can be
done with the ‘|’ key, deselecting a zone can
be done with the ‘O’ key.
Return to ‘RUN’ mode
User Programming is now completed.
Pressing BREAK will exit the user
programming mode, and return to the
normal ‘RUN’ mode.
14.4 ERROR MESSAGES
During normal operation, all modules
present in the system are continuously
tested. If a module stops communicating
with the processor, a message is sent to the
display stating the faulty module type and
the module number. If a Call Station stops
communicating with the system, this is also
displayed. If a Control Relay Module is
present, an SM30 system fault will
deactivate relay 1, providing the possibility
to switch on a remote warning light, buzzer,
etc..
** ERROR **
CALL STATION:XX
MUSIC INPUT MOD
LINE OUTPUT MOD
CST INPUT MOD XX
MIC INPUT MOD XX
ZONE REL. MOD XX
CTL RELAY MOD
REC MESSAGE MOD
CTL INPUT MOD XX
If more then 1 error occurs, the different
messages will be displayed sequentially.
When the Recorded Message Module is
installed, but the mode switch is not set in
the ‘SYS’ position, the following message
will be displayed:
** ERROR **
MESSAGE MODULE
SWITCH POSITION
Music Routing
SELECT PROGRAM :
MUSIC ROUTING
MUSIC ROUTING
000000 ZONE : 01
1
2
4
GB/SM 30 user manual 5/26/98 10:18 AM Page 47