Filter
Top Products
Monitoring NetAXS™ Status
Monitoring Outputs
NetAXS™ Access Control Unit User’s Guide, Document 800-04410, Revision A 85
4.5 Monitoring Outputs
An output is an output device that changes its normal state when it is energized, pulsed, or time-zone
controlled. For example, a successful card read at a reader pulses a door lock. The lock changes its
normally locked state to an unlocked state and the cardholder opens the door.
A NetAXS™ panel supports one output for each of its four doors. The panel also supports four
additional outputs for auxiliary devices and 64 downstream outputs. Outputs can be configured singly
as discrete outputs (see “Outputs Tab“ on page 38 and “Outputs Tab“ on page 55) or collectively as a
group of outputs (“Groups Tab“ on page 57).
Note: The Pulse and Restore to Time Zone buttons will only function when an output or group has a
valid pulse time or a time zone assigned.
Click
Status > Outputs to display the Doors/Aux/Other/DnStr tab of the Output Status screen:
Figure 4-6: Status > Outputs > Doors/Aux/Other/DnStr Tab