Filter
Top Products
Configuring via WIN-PAK
Adding a New NetAXS™ Panel
NetAXS™ Access Control Unit User’s Guide, Document 800-04410, Revision A 73
The screen captures shown below show the configuration for the default interlocking for a single
door:
12 Reader 4 tamper/auxiliary.
13 Primary power status - external (or General input). There is
also a system primary power alarm 17 that reports through
the ADV and is not a wired port.
14 Tamper (or General input).
Table 3-1: Interlock Reassignments for NetAXS™ (continued)
Interlock Function