Filter
Top Products
Configuring via the Web Server
Configuring the System
NetAXS™ Access Control Unit User’s Guide, Document 800-04410, Revision A 13
Baud Rate Specifies the transmission rate (bits per
second) between the host and the panel. Select
the highest rate that your modem will support
(19,200 bps is recommended).
Port Number Specifies the port number for the Ethernet port
(default is 3001).
Host IP Address Enter the host system (or WIN-PAK server) IP
address here if you selected
Reverse TCP/IP
in the Connection Type field on this screen.
Time Sync Synchronizes the panel’s time with the host’s
time.
Enabled – Causes the panel(s) to be
automatically time-synchronized with the
host.
Loop Baud Rate Specifies the transmission rate (bits per
second) among the downstream NetAXS™
panels on the loop. For NetAXS™
downstream panels, it is recommended that
you select 115,200.
Force Baud Reset
Tells all downstream NetAXS™ panels to
change to the selected Downstream baud rate.
This saves the user from having to go to each
panel one by one
Table 2-1: Configuration > System > Host/Loop Communications Tab Field Descriptions (continued)
Host/Loop Setting Description