Filter
Top Products
38 www.honeywell.com
Configuring via the Web Server
Configuring the System
2.4.2 Outputs Tab
An output, or output relay, is a switch on the panel that either energizes or de-energizes or pulses an
output device, such as a door lock or an LED. For example, a successful card read at a reader (input
device) causes the output relay switch on the panel board to change the normal state of a door lock
(output device), so that the normally locked door strike releases and permits entry. This tab configures
the lock and reader LED output relays, either as individual (discrete) outputs or groups of outputs.
Click the
Outputs tab. The Lock > Discrete tab window appears, enabling you to configure an
individual lock output. Select the output number in the dropdown list at the top of the screen. Note that
lock and reader LED outputs are associated with each of the four doors on a NetAXS™ panel.
Figure 2-13: Discrete Lock Output Configuration
To view a configuration of a group of outputs, click
Group and select the group number from the
dropdown list at the top of the screen. The group configuration appears. Note that you can only view