Filter
Top Products
Configuring via the Web Server
Configuring the System
NetAXS™ Access Control Unit User’s Guide, Document 800-04410, Revision A 35
Figure 2-12: Configuration > Doors > Reader > Card Formats Tab
3. Click to highlight each desired card format listed in the Available box, and click the green right
arrow button to move the format(s) into the Selected box.
Note: If you select no formats, the reader will function in legacy mode and the reader interprets
the panel’s formats. If you select a subset of formats for a given reader, the reader will interpret
only those formats and ignore formats that are not selected.
4. Click
Submit Changes.
5. If you want to create a new card format, click the New Format button to display an empty Card
Format Data Layout screen. Use the field descriptions given in the following table to define the
layout and click
Save.
Note: To disable a field, enter “--” in the Start Bit box and “0” in the Num Bits box.
Table 2-5: Configuration > Doors > Reader > Card Format Fields
Setting Description
Name Displays the name by which the format will be listed in the
Card Formats tab. The name is user-defined.
Reverse Bit Order Returns the message from the reader in reverse bit order
(least significant bit first and most significant bit last).