Filter
Top Products
Configuring via the Web Server
Configuring the System
NetAXS™ Access Control Unit User’s Guide, Document 800-04410, Revision A 41
Steps
: Use the descriptions in the following table to configure each individual lock or Reader LED:
Table 2-6: Configuration > Doors > Output Tab Field Descriptions
Setting Description
Name Enter a unique name to identify the device.
Pulse Time Specifies the duration for which the device will assume abnormal
status. For example, it specifies how long a horn will sound or a door
strike will remain released. Enter the desired number of hours (1024
maximum), minutes (60 maximum), and seconds (60 maximum).
The sum of all three units comprises the pulse time. Note that you
can express seconds in tenths of a second. The default pulse time of
the reader LED is two seconds, and the default pulse time of the door
lock is 10 seconds. You may want to change the reader LED pulse
time to match the pulse time of the door lock, for example, to enable
a guard to know that the door is still open, or to support handicap
access.
Time Zones Specifies two schedules:
•
Energized – sets the period during which the output switches
are automatically energized.
•
Disable Interlock – sets the period during which the interlock, or
a programmed interaction between selected inputs and outputs
will be disabled.
Latching When selected, this toggles a relay with either a valid card, interlock,
or manual pulse.
Interlock Enables you to disable the interlock, or programmed interaction
between two points.
TZ Card Toggle Requires, like the First Card Rule, a valid card read within the time
zone to enable the time zone (period in which doors are unlocked) to
take effect. Unlike the First Card Rule, however, the user can swipe
the card a second time to return the doors to a locked state. Note that
both TZ Card Toggle and First Card Rule cannot be enabled at the
same time.
First Card Rule Requires a valid card read within the time zone to enable the time
zone (period in which doors are unlocked) can take effect. Note that
both TZ Card Toggle and First Card Rule cannot be enabled at the
same time.