Filter
Top Products
32 www.honeywell.com
Configuring via the Web Server
Configuring the System
• Define the time zone during which the reader will be in lockdown mode (see Time Zones Tab,
page 26 for details about setting time zones). When the reader is in lockdown mode, entry is
prevented but egress is still allowed.
• Define the reader’s access mode (the combination of card and/or PIN entry required by the
reader). Note that the access mode defined here for the door can be overridden by a card
assigned with a VIP card type (see “Adding New Cards“ on page 47 for information about
assigning a VIP card type).
• Enable the Card Only, PIN Only, Card and PIN, and Card or PIN access modes with either the
Supervisor or Escort rule:
– Supervisor Rule: When the supervisor presents his card during the specified time zone just
once, he gains access but does not enable access for non-supervisory personnel.
– Escort Rule: This rule requires a supervisor escort for a non-supervisor.
• Configure the anti-passback feature. When enabled, the anti-passback feature prevents an
entrant to an area from passing his card back to another potential entrant. Note that
anti-passback must first be enabled at the Configuration > System > General screen (see
General Tab, page 14).
• Specify the data format the reader must use to read the card data.
• Reconfigure a selected format’s data layout.