Filter
Top Products
60 www.honeywell.com
Configuring via the Web Server
Configuring the System
Steps to create an interlock:
1. Click the
New Interlock button to display the screen.
2. Use the descriptions in the following table to configure the interlock:
3. Click the
Add Interlock button to create the interlock.
Steps to modify an interlock:
1. In the Int Lk column, click the number of the interlock you want to modify.
2. Click the
New Interlock button.
3. Use the descriptions in the table above to make the desired modifications in the empty Trigger,
Reacting Component, and Reacting Component’s Action fields for the selected interlock.
4. Click the
Add Interlock button to complete the modification.
Steps to delete an interlock:
1. In the Int Lk column, click the number of the interlock you want to delete.
2. Click the
Delete Interlock button to display the Delete Interlock screen, and click OK to
complete the deletion.
Table 2-13: Configuration > Interlocks > Field Descriptions
Interlock element Description
Trigger Specifies the input, output, or output group for
which a change of state will cause a reaction from
another input, output, or group. Also, use the drop
down list to specify the number of the input,
output, or group.
Reacting Component Specifies the input, output, or output group that
will react to a change of state from the trigger
point. Also, use the drop down list to specify the
number of the input, output, or group.
Reacting Component’s
Action
Upon Trigger Alarm – Specifies the reacting
component’s action when the trigger’s change of
state occurs. Select the action from the Upon
Trigger Alarm drop down list.
Upon Trigger Normal – Specifies the reacting
component’s action when the trigger’s change of
state occurs. Select the action from the Upon
Trigger Normal drop down list.