Configuring Rights
Figure 4-33. Creating a New Redirected Traffic Filter
You can create the filter specification in one of two ways:
• Specify the traffic protocol, and the destination IP address and port, or
• Define the filter as a regular expression in tcpdump syntax. This enables you to define complex filters.
You specify the new destination by providing a port and IP address that the traffic should be redirected
to.
To create or edit a Redirected Traffic filter, do the following:
Step 1. Type a name for this filter. You can change the name of an existing Allowed Traffic filter by typing
a new name.
Step 2. Type a description for the filter, or modify the existing description.
Step 3. To specify the filter by selecting the protocol, and providing the port and destination IP address,
select the
Capture traffic via a specific protocol/port/address radio button. Then do the following:
a. Select the protocol of the traffic you want to allow from the drop-down list in the Protocol
field.
4-68 HP ProCurve Secure Access 700wl Series Management and Configuration Guide
