Filter
Top Products
96
PC connection
Computer does not
recognize the recorder
when USB connection cable
is connected.
Check the operating environment.
•
Is the recorder’s operating mode setting correct? The recorder will •
not be recognized when in REC mode or PB mode. Please set the
recorder to PC mode.
If your computer has multiple USB terminals, please try connecting
•
the recorder to a different USB terminal.
Switch the recorder’s power off and back on again, and reconnect
•
the USB connection cable.
P71
An error message appears
on the computer when the
USB connection cable is
disconnected.
Always follow instructions on how to remove hardware safely as
•
appropriate for your computer when disconnecting the USB cable.
—
SD Memory Card
The recorded images on an
SD Memory Card appear
strange.
The data on the card could be corrupted. Data can be corrupted by
•
static electricity and electromagnetic waves. Please always save
important data to a computer or other storage media.
—
The SD Memory Card
cannot be used even after
formatting.
There could be a fault with the recorder or with the SD Memory
•
Card. Please consult the dealer. Always use only SD Memory
Cards of 512 MB - 32 GB with this recorder.
—
The recorder does not
recognize the SD Memory
Card even though it is
inserted correctly.
Was the inserted SD Memory Card originally formatted with a
•
computer? Always use this recorder to format SD Memory Cards.
Please be aware that, when an SD Memory Card is formatted, all
data recorded on the card will be erased and will not be restorable.
P34
The SD Memory Card is not
recognized when inserted
into other devices.
Please check that the device is compatible with the capacity or type
•
(SD Memory Card/SDHC Memory Card) of the SD Memory Card
that you are using.
For details, please consult the device’s own operating instructions.
P16
Troubleshooting (continued)