Filter
Top Products
AUDIO MON/ADV
REC/
PAUSE
AUDIO MON/ADV
REC/
PAUSE
28
The portable recorder has 3 operation modes: REC mode, PB mode and PC mode.
Press the [MODE] button to change the mode.
While the power is off, connect the
AG-HCK10G camera head (optional) to the
portable recorder with the camera cable
(optional), and then press the [POWER] button
for 2 seconds or longer to turn on the power.
∗
Be sure to turn off the portable recorder’s
power before connecting or disconnecting
the camera head.
or
Press the [MODE] button.
Press the [MODE] button for 2 seconds or longer. “CHECK USB CABLE.” is
displayed. Connect the portable recorder to the computer with a USB cable.
Operation is not transferred to the PC mode when the AG-HCK10G •
camera head is connected.
When the AG-HCK10G is connected, turn
off the power, disconnect the camera cable, turn the power back on, and
then proceed with the operation.
Press the
[POWER] button
for 2 seconds or
longer to turn on
the power.
REC mode
PB mode
PC mode
<SDI mode>
Used when connecting the portable
recorder to a device that has an
HD-SDI output, for recording onto
the portable recorder’s SD Memory
Card. This is suitable for operations
such as long backup recordings.
Before switching between SDI mode and CAM mode, be sure to turn off •
the power of the portable recorder. Connect or disconnect the camera
cable and then turn on the power again.
<CAM mode>
Used when operating the
AG-HCK10G camera head
(optional) to shoot with the portable
recorder and record onto the SD
Memory Card.
Press the
[POWER]
button for 2
seconds or
longer
to turn off the
power.
Used for the playback of clips that are recorded
on the SD Memory Card.
Also, clip management operations, such as
deletion and protection, can be performed on the
thumbnail display screen.
Used when connecting to a computer to perform
operations such as clip saving and editing.
Operation modes