Filter
Top Products
Displays
77
R ■
REC STOPPED.
NOW WRITING.
Video recording has been stopped. Data is now
being written onto the card.
REPAIR CLIP?
Do you want to repair clips now?
REC WARNING
IRREGULAR FRM SIG.
•
Displayed when an abnormality is detected in the signal that
is input to the portable recorder when recording SDI input.
Recording resumes when the input signal returns to
normal. “Resumption of recording” (warning display)
can be canceled by pressing the [REC/PAUSE] button.
S ■
SD CARD FORMAT?
YES NO
Do you want to format the SD Memory Card now?
Yes/No
SDI INPUT ERROR.
(OTHER FORMAT)
•
Displayed when the format of the SDI input signal is
different from the recording format of the portable recorder.
SET DATE AND TIME
Set the clock.
T ■
THE CLIP IS PROTECTED.
PLEASE CANCEL PROTECTION.
The clip is protected. Cancel the protection.
THE RECORDING IS STOPPED
(OVER THE LIMITATION)
The recording will stop. (Continuous recording for 12 hours)
THE TC MODE IS CHANGED TO "NDF"
NDF is selected as the TC mode setting.
(Displayed when [SYSTEM FREQ] is set to [59.9Hz])
THIS BATTERY CANNOT BE USED.
The battery currently inserted into the portable
recorder cannot be used.
THIS CARD CANNOT RECORD IN VIDEO
MODE.
The card cannot be used for video recording.
THUMBNAIL DATA ERROR IS DETECTED.
An error has been detected in the thumbnail information.
U ■
UNABLE TO FORMAT.
The card cannot be formatted.
W ■
WRITE PROTECT
The card is write-protected.
Error displays
The following messages are displayed when an
error occurs in the portable recorder or the SD
Memory Card. If the problem is not solved by
switching the power off and back on again, either
change the card in accordance with the instructions
displayed, or consult the place of purchase.
C ■
CANNOT RECORD
Displayed when an error has occurred during recording.
R ■
REC WARNING
Displayed when an error has occurred during
recording. Start the recording again. If the message
appears again, consult the place of purchase.
•
Switch the power off if the message continues to appear.
Try inserting a different SD Memory Card if the
message appears again after restarting recording.
S ■
SYSTEM ERROR
TURN POWER OFF
Displayed when an error has occurred in the
system. Switch the power off and back on again.
• If this error is displayed when accessing the SD
Memory Card, such as when deleting a clip, the
SD Memory Card may be damaged. Replace it
with a new SD Memory Card.
• If this error is displayed when repairing the
SD Memory Card, use the AVCCAM Restorer
content repair software. (Page 34)
• When the AG-HCK10G camera head is
connected, displayed when the camera cable
is removed with the power on. First turn off the
power, then remove the camera cable.
When the camera head is connected ■
When the AG-HCK10G camera head (optional) is
connected and recording is in progress, displayed when
an abnormality is detected. Turn the power on again.
FOCUS NG
TURN POWER OFF (error in focus operation)
PSD NG
TURN POWER OFF (error in camera shaking detection)
ZOOM NG
TURN POWER OFF (error in zoom motor)