Panasonic AG-HMR10P Video Gaming Accessories User Manual


 
Reference
95
Recording
Cannot record even
through the SD Memory
Card is inserted correctly.
Is the write-protect switch on the SD Memory Card in the “LOCK”
position? The card cannot be recorded to if the switch is in the
“LOCK” position.
Is the remaining memory available on the SD Memory Card
extremely low? Please save contents onto different media and
delete unneeded data from the card, or use a new card instead.
Has the SD Memory Card been correctly formatted? Alternatively, is
the card of a format that is incompatible with this unit? Reformat the
card with the unit.
8 MB - 16 MB SD Memory Cards cannot be used.
P33
P34
P16
Recording stops by itself. Is your SD Memory Card compatible with use for video recording?
Always use an SD Memory Card compatible with use for video
recording.
P16
Editing
Cannot read the data on the
SD Memory Card.
Make sure the SD Memory Card is formatted correctly.
If it is not, format the card in the unit.
P34
Cannot perform nonlinear
editing.
Check the specifications of your computer and connecting cable.
P70
Displays
Something is wrong with
the time code display.
The time code display may not register a regular count if a clip is
played in the reverse slow mode. This is normal.
Playback
Cannot play even when I
press the [ENTER] button.
Make sure that the mode is not REC mode.
Press the [MODE] button to switch to PB mode.
P58
Mosaic-like noise appears
when I cue or review a clip.
This noise is inherent to digital video technology. This is normal.
Images do not appear on
the television even though
I have connected the
recorder properly.
Make sure the input selector on your television is set correctly.
Read the television’s instructions carefully and select the correct
video input connector for the recorder.
Cannot hear any sound
from the recorder’s
speaker.
You may have turned down the recorder’s volume control too far.
Adjust the volume level using the [AUDIO MON/ADV] button +.
P68
(Continued on the next page)