Filter
Top Products
56
Uploading the metadata
(META DATA)
You can perform any of the following operations.
If necessary, perform preparations prior to the
operation.
Loading the metadata
Insert the SD Memory Card on which the •
metadata is recorded into the portable recorder.
(For a description of the clip metadata,
see page 55.)
Selecting whether to record the metadata
on the SD Memory Card
Initializing the metadata inside the portable
recorder
Displaying the metadata inside the portable
recorder
1
Press the [MODE] button to select REC
mode.
Operation modes (Page 28)
2
Press the [MENU] button.
Using the setup menus (Page 29)
3
Press to select [META DATA], and
then press the [ENTER] button or
.
4
Press to select an item, and then
press the [ENTER] button.
CARD READ:
The metadata that is set on the SD Memory
Card is loaded onto the portable recorder.
Press the [ENTER] button to select the
metadata to be loaded, select whether or not
the metadata is to be loaded (YES/NO), and
then press the [ENTER] button.
Up to 10 items of metadata on the SD ·
Memory Card can be displayed, starting
from the most recent creation date.
If characters other than single-byte ·
alphanumeric characters are used in the
metadata file name that is loaded, they are
displayed as “
∗
”.
RECORD:
Sets whether to record the metadata
that is loaded onto the portable recorder
simultaneously on the SD Memory Card.
Select whether or not to record (ON/OFF),
and then press the [ENTER] button.
The factory default setting for this mode is
[OFF].
USER CLIP NAME:
The USER CLIP NAME recording method is
selectable. See the next item for details.
CLIP COUNT RESET:
Resets the COUNT value to 1.
Select whether or not to reset (YES/NO), and
then press the [ENTER] button.
META DATA PROP:
Select [YES] to display the metadata that
has been recorded on the portable recorder.
META INITIAL SET:
Initializes the metadata that has been
recorded on the portable recorder.
Select whether or not to initialize (YES/NO),
and then press the [ENTER] button.
5
Press the [MENU] button to close the menu.
Clip metadata (continued)